For start, you have to download the followings stuff:

- QuickPwn for Windows

- BL3.9 and BL4.6

- iPhone 2G 2.1 firmware update

1.
Extract the QuickPwn21-1.zip

2.
Connect your iPhone to the computer and launch iTunes.

3.
Select your iPhone from the list of devices on the left. Now hold down shift and click the Restore button. Restore is preferred as it won’t create any wasted space on your iPhone.

4.
Navigate to the Pwnage folder on your desktop and select the 2.1 firmware ipsw. Click the Open button to continue.

5.
Once iTunes has finished updating your iPhone to the 2.1 firmware you may launch QuickPwn.exe from the Pwnage folder on your desktop.

6.
Click the Browse button to locate your iPhone firmware.

7.
Select the 2.1 firmware ipsw from the Pwnage folder on your desktop then click the Open button.

8.
You can now select whether to Add Cydia, Add Installer, Replace Boot Logos, and Unlock Phone. Select the ones you would like to perform then click the clue arrow button

9.
You will now be asked to select your bootloader files. Click the Browse button and select the 3.9 bootloader from the Pwnage folder on your desktop. Likewise do the same thing for the 4.6 bootloader file. Then click the blue arrow button to continue.

10.
QuickPwn will now ask you to confirm your iPhone is connected via USB before continuing. Click the blue arrow button to proceed.

11.
QuickPwn will now automatically put your iPhone into recovery mode. Once its in recovery mode you will be prompted to: Hold the Home button for 5 seconds, Hold the Home and Power buttons for 10 seconds, then release the Power button and continuing holding the Home button until your iPhone is in DFU mode.

Watch the prompts carefully and follow along.

12.
Once QuickPwn detects your iPhone in DFU mode it will begin the jailbreak process.

13.
Once jailbreaking is complete QuickPwn will inform you that it was successfull. Your iPhone will then proceed to run BootNeuter. This process will take about 5 minutes. Please be patient. Your iPhone will reboot when it has completed the process successfully!

And that is it !!!…you now can use you iPhone on any network you want and with all it’s feature available and functional….

First, let me intorduce myself. I’m REDman…and, from now I will help K.Ro to write on this blog.

I will write different tutorials, some of them new, some of them old, and I hope that what I’m doing will help you, the readers on your different situations and problems that you encounter.

I will try to cover a wide range of tutorials…

All the best,

REDman

A PowerPoint presentation can be found on YouTube and Myspace, but also a movie from YouTube may be included in a PowerPoint presentation.

PowerPoint in YouTube
YouTube and Myspace only accept video formats like MPEG, AVI, WMW, MOV.

For YouTube films may have a maximum size of 100MB and be long than 10 minutes.

To transform the PowerPoint presentation into a film must first be saved in a format pptx, pps or ppt. Download and install the application Wondershare DVD Presenter. [Website]
With this software you can transform PowerPoint document ‘ppt / pps / pptx / pptm’ in the format ‘. Mpg.

Open application Wondershare DVD Presenter, click Browse and upload files, PowerPoint, and then click Next.

Note. If you want Mpg film to be converted into other formats such as WMV, AVI, MOV, uses the free service offered by Media-convert .

In step Set Output Options, select ‘Convert to Video File (s)’ ‘MPEG-2′ format and choose the folder where you want to create variant MPG. Next keep pushing until the very end to get MPG video file that you can upload YouTube or MySpace

YouTube in PowerPoint
If you want to enter a material from YouTube or Myspace in PowerPoint need for the first time you download the file video on YouTube / Myspace, then transform downloaded movie, which will be formed. Flv in a PowerPoint format accepted as Mpeg, AVI , MOV, WMV.

To turn the film in these formats should copy the URL of the film on YouTube and print it on its site www.vixy.net, select the format and click Start.
All the conversion can be done manually and after the transformation is finished, download the file and insert it in PowerPoint.

Best format in which you can load (uplodezi) on YouTube is:
– MPEG4 (Divx, Xvid) format
– 320×240 resolution with 30 frames per second (frames per second)
– Audio CD (44.1kHz)

Upload YouTube
Resize the movie with settings above it will look much better in YouTube. Once you have finished editing the film (must be under 10 minutes and be less than 100MB) it must load the site.

1. Click “Upload Videos” in the top right corner of any YouTube pages.
2. Enter as much information about your film, including Titllu, description, tags, category it is part. May include As with so much information is more easily found by visitors.
3. Decide if you want to be private or public.
4. Click “Continue Uploading”
5. In the next window, click Browse, search video file, select it and click “Upload Video“.

After you have downloaded the movie, you can present the film presentation and other members clicking on the Share the bottom of the player. Enter e-mail address or username YouTube those who want to send them link the film, then click Send.

A much better option is to convert audio-track CD in MP3 files and then run files as part of the presentation, instead using music from the CD. Thus, you make presentations to be more portable and less susceptible to damages of time.
MP3 file Insert

This tutorial starts from the premise that already have some MP3 files ready to be used. Positionate these files in the same folder and file presentation on the work currently.

In your PowerPoint presentation, find the slide that you want to add an audio track. Then, select Insert> Movies and Sounds> Sound File… from the pull-down menu. Find MP3 file you want using the dialog box Insert Sound and click on the OK button. Then you will be asked to specify if you want the sound to run automatically in the presentation slides. Click on Yes or No, depending on the case. You can always change this option if you’re not sure.
Power Point

You will see a small icon appears in the middle of the slide. This icon represents the sound file. Delete the icon , remove track of the presentation. You can move elsewhere icon of the slide if you need to see it during the presentation, or you can move on the slide if you want to hide it during the presentation. It is enough to give him and see it move elsewhere.

May there is a way to hide the icons sound, and we get to it later, but removing icon the area’s slide is probably the simplest method.
Controlling the playback

PowerPoint 2002 has a number of advanced features you can use to control when and how it is run the track.

To control when it ran the track, you must do specific event that cause this action. Once you do that, you can control how it is run the track, changing the parameters such as the starting and concluding.

You can control when and how events occur using animation panel Custom Animation. Because the panel to be displayed, select Slide Show> Custom Animation… of the pull-down menu or by clicking right on the menu and selecting sound Custom Animation… In any case, the right pane change to show a list of all items the animated slide. Since a menu sound is by its very nature, an animated object, it will appear in the list and will be identified by the file name.

Basically, there are three possible way for any effect animation, including run-track audio. These are as follows: On Click (click) With Previous (along with the previous one) and After Previous (after the previous one). If detonation set to start “On Click”, the track will start to run when the mouse button is pressed. If detonation start is set on “With Previous”, the track will start to run simultaneously with the event animation. Using this way is possible to run the track while another object or other objects move on the slide.

If detonation start is set on “After Previous”, the track will start to run after the previous animation event ended. However, this has an additional parameter that lets you set a time delay in units the second half. This means that, for example, you could put your track run within 4.5 seconds after the previous event has ended.

When you insert a sound file, is set to detonation On Click if you choose not to track the start automatically, and is set to the Previous After a delay of 0 seconds if you choose to start automatically. current home is displayed in the top of the Custom Animation panel, the list “Start”. It may be changed by clicking the arrow on the lower guidance and selecting an option different from the list.

If detonation start is set to After Previous, you can set the delay time by clicking the arrow oriented lower near the file name from the list of animation and timing… selecting from the menu (see illustrations above). This shows the tab for the timing box dialog Play Sound, visible in the left side.

Use option Delay for a set number of seconds as you expect your audio track, after the conclusion of the event earlier, before running to start.

The other option that you might be useful here is Repeat. A can be used to control the number of repetitions of a sound. This option may not be very useful if track design audio great length, but can be useful when working with short sound effects.
How (effect)

To control the way in which a running track, click on the arrow oriented located at the lower right sound file name on the panel and select Custom Animation Effect Options… from the menu. This action will lead to displaying the Effect tab on the dialog box Sound Play, shown below.

Tab’s Effect is used to control the starting time and stopping for the track, and this can be activated in different ways.

You can choose to start a track “From beginning” (dancer), “From last position” (from last position) (assuming that has already started and then ended) or “From time” (when … ). From time option can be used to start a run at some point situated in a particular track, to the nearest second. Time posted “00:00″ is given in minute and second.

Also, you can choose how to run a cease track. Track your audio will not run automatically until reaching the final, but will be concluded by a particular event. Stop playing option lets you control this event. A track can be stopped at the click (click on), after (After) the current slide, or after (After) a specified number slide. Track your will continue to run until it reaches specified event, but nevertheless, the track will stop automatically if you get to the final event before stopping to be reached.

Section setting sound of the dialog box can be used to control volume and track the visibility of the iconi sound while running presentation. You can use this option “Hide while not playing” ( “Hide while not running”) as an alternative to moving on iconului slide.
Running track’s audio

Once you have operated various changes, there is neither a special action on that need to make one. With the condition to have a sound card in your computer, too, that it be connected to some speakers, and speakers are turned on, you’ll hear the audio track during the presentation slides.

There is one final issue to be clarified, and this is important because the take on in PowerPoint. Probably already know that when you insert an image into a slide image is an integral part of the presentation file. There are treated equally and sound files and film. When you insert a sound file into a slide, produces a link to audio file. The sound is not part of the file when the presentation is saved. If you want to transfer a presentation on another computer, you must move and sound file, because otherwise will not hear any sound. When it comes to a detonation file sound during a presentation, PowerPoint file search sound where it was located when it was inserted for the first time. If the file is not found, the sound will not be run.

In general, it is advisable you stock files sound and film in the same folder with the file associated presentation. This means that you can move or copy the folder at the same time being sure that all files target of the links is in the same place, even when a move to another computer or when a copy on a CD.

To add a <strong>logo in flash</strong> should do the following:
enter the administrative panel => General => setup => Configuration
There copy the code it:

Code:

<embed src = “HTTP: / / link to tab flash. SWF” quality = “high” pluginspage = “http://www.macromedia.com/go/getflashplayer” type = “application / x-shockwave-flash “Width =” 500 “height =” 200 “> </ embed>

where:
width = width of the logo (pixels)
and
Height = Logo Height (pixels)

We also need to replace the logo of the forum with an image type transparent gif
an example of such images can find here: http://illiweb.com/fa/vide.gif

Now you have to paint cursor on the scene. You can use the pencil tool or other drawing tools. It is recommended to do do cursor to the left.

Select the cursor using the tool for selecting or clicking Ctrl + A to select whatever is on stage. Once selected converteste drawing into a symbol. Symbols can be controlled through ActionScript toward primary forms and designs that can not be controlled in the same way. To convert the drawings into a symbol, go to Modify> Convert to Symbol or press F8 while the subject is selected. In the window, “Convert to Symbol ’select’ Movie clip ‘that kind of symbol. Make sure you have selected the upper left corner as a recording. The registration center set Movie. Click OK.

While Movie Clip the newly created is selected, go to Properties and Inspector rename Movie Clip the instance with a name. The name of the court are used as reference to control clip using Action Movie Script. It uses the name cursor_mc when you rename the court.

Our scene is now set. All you have to do is to write ActionScript code to make the cursor to work. In Layer panel creates a new layer clicking on the Insert Layer. You can rename this layer named “ActionScript. Right click on the first frame of layerului and select Actions to access panel ActionScript

The ActionScript

cursor_mc.startDrag ( "true");
Mouse.hide ();

Copy paste these lines in Action Panel. Press Ctrl + enter to test the animation and you will see how Customized mouse will work.

Favicon is actually a file type icon with certain characteristics:
1. name must be favicon.ico
2. sizes are welcome 32×32 or 16×16 pixels
3. Up to 265 colors.

Before you add a favicon pages sure to be accepted on the server such files.

To add a favicon are required two operations.
1. insert the following line in HTML page in the area head:

2. load (upload) on the server in the same folder associated with the page.

Usually favicon the load as the root domain (no other folders of the site).
If we use one for each sub favicon in part’ll adapt label above the path to the favicon associated. (Recommend to specify all the way to file, not the path relative)

This is shown by browsers: Mozilla, Firefox, Opera but not Internet Explorer.

To achieve a favicon can use a specialized graphics program, such as Adobe Photoshop to be added to a plug-in that allows saving format. Ico, or online at:
FavIcon from Pics
FavIcon Generator

From one of the addresses above, can turn an image file (gif, jpg, bmp, png) located on your computer in favicon:
1. select the image you want to turn into a Favicon using the Browse button
2. Generate press Favicon.ico or Create Icon
3. In a few moments you anounced that you can download the file icon button Download Favicon.

You can check online file favicon and how it was pasted on the web at:
Favicon Validator

May I recommend the program IrfanView and the related plugins (free) which also can save any picture in the file icon.

Favicon animated
You can assign a page and animated version of favicon provided that in this case inserate line in the HTML code in the head area will be:

Such a favicon can be obtained online at FavIcon Pics from the transformation from an image file into animated gif. This type of icon is not compatible with most browsers, so I recommend only static icon.